Ercolina CE40 Angle Roll

Ercolina CE40 Angle Roll is the perfect hydraulic bender with unlimited step programming and passes for rolling parts. Available with a manual (CE40MR3) or hydraulic (CE40H3) center roll position.

Key Features of the CE40 Angle Roll

  • 40mm roll shaft diameter
  • Maximum pipe capacity 2″ Sch. 40
  • Maximum angle capacity 2″ x 2″ x 1/4″
  • Bending speeds 20% faster than competitive machines
  • Universal tooling set included with each machine – 6-5/8″ OD
  • Forged roll shafts precision ground and fitted for maximum performance and minimal deflection
  • Heavy duty structure and rigid components for high section modulus ratings
  • Reinforced engineered mainframe design proven to outperform competitive models
  • Patented by Ercolina simultaneous downfeed and roll movement to minimize deformation on hydraulic model
  • Programmable touchpad controls with digital center roll position display on hydraulic model
  • Digital center roll position display on manual model
  • Hydraulic machine with memory storage with eight (8) individual programs and unlimited passes
  • Remote pendent with low voltage controls and foot pedal switch
  • Threaded roll shafts with micrometric flange adjustment helps eliminate spacer usage
  • Inline direct drive roll shaft system
  • Optional Anti-twist correction system for angle iron “Leg In” applications
  • All capacities based on mild grade materials; heavy wall and high tensile materials reduce machine capacity.

CAPACITIES & SPECIFICATIONS

Material Type CE40H3 CE40MR3
Pipe (max) 2″ Sch. 40 2″ Sch. 40
Angle (max) 2′′ x 2′′ x 1⁄4 2′′ x 2′′ x 1⁄4
Tube (max) 2 1/2″ – .125 wall 2 1/2″ – .125 wall
Roll Shaft Diameter 40mm 40mm
Center Roll Positioning Hydraulic 10 tons Manual with patented torque multiplier
Shaft Speed 10 RPM 10 RPM
Universal Tooling (included) 6 5/8″ O.D. 6 5/8″ O.D.
Programming NC – Touchpad Not Available
Distance Between Shafts 10 5/8″ 10 5/8″
Operating Voltage 220V or 480V 3ph 220V or 480V 3ph
Length, Width, Height 39″ x 26″ x 59″ 39″ x 26″ x 59″

All capacities based on mild grade materials; heavy wall and high tensile materials reduce machine capacity.

PRODUCT INFO

For your convenience, there are instruction and service manuals for Ercolina Benders below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.

RingRoll Section Bender

STILL LOOKING FOR WHAT YOU NEED?
Our Service Engineers have the answers.