HYDMECH DM-1318P Double Miter Semi-Automatic Bandsaw

The DM-1318P double miter, semi-automatic band saw provides exceptional miter cutting for medium duty applications. Featuring a 13″H x 17 3/4″ W capacity at 90°, 5.5 HP motor, and 1 1/4″ blade, the DM-1318P is a versatile double miter band saw.

Features and Benefits of The HYDMECH DM-1318P Double Miter Semi-Automatic Bandsaw

Its versatile swing head with easy to read angle scale, saves operator time. The heavy-duty gearbox and motor assembly ensures the DM-1318P will deliver maximum productivity. The cast iron double swivel head features an easy to read angle scale and “quick” stops at 90, 45, and 60 degree positions. The cast iron vise slides on linear ways which can be easily positioned to either the left or right side of the head and includes a quick release mechanism for rapid positioning.

Standard Features:

  • Heavy duty cast iron saw head
  • 5 HP true direct blade drive – no belts/pulleys
  • On-demand hydraulics save energy
  • Quick release, hydraulic cast-iron vise on linear ways
  • Rotating table with cut line
  • Mechanical band tensioning with digital readout
  • Gravity head feed
  • Automatic hydraulic head lifting in semi-automatic mode
  • Swing away, semi-automatic control
  • Replaceable blade brush
  • Robust steel base
  • Easy to read angle scale
  • Digital angle display
  • Adjustable guide arm
  • Replaceable carbide guide inserts
  • Safety door interlocks
  • Flood coolant
  • Laser light

Standard Options:

  • Mist lubrication
  • Work light
  • Variable vise pressure
  • Idler conveyors

DETAILED SPECIFICATIONS

Rectangular Capacity at 90°13” H x 17 3/4” W330 mm H x 450 mm W
Round Capacity at 90°13″330 mm
Blade Dimensions1 1/4” x 14′ 9”32 mm x 4496 mm
Blade Drive5.5 HP VFD4 kW VFD
Blade Speed65-330 sfm19-100 m/min
Coolant Tank Capacity21 US gal80 liters
Machine Weight2,515 lbs1140 kg
Machine Dimensions130” W
69” L
89” H
3302 mm W
1752 mm L
2260 mm H

BANDSAW PARTS AND SERVICE

Fabtech Solution is a trusted dealer of HYDMECH Band Saws, our service department regularly repairs and maintains wood and metal cutting bandsaw machinery. We carry complete lines of replacement blades, aftermarket parts and blade coolant. A large selection of bi-metal, grit and carbide tipped bandsaw blades as well as Fluid and Drip Lubricants. We can ship and deliver to your shop. Our Service Department will keep your saw in motion.

We've included several resources and troubleshooting guides below. This material is for reference purposes only; please contact our Service Department with any questions or concerns.

Hyd-Mech DM10 Manual Double Miter Band Saw

Contact our Service Department today with any questions.

TROUBLESHOOTING ISSUES

What type of hydraulic oil is used on HYDMECH machines?
Texaco Rando HD46 or equivalent or machines built with Parker or Bosch Rexroth Power Packs use Shell Tellus 22 or equivalent hydraulic oil. The fill level is marked as a black line on the temperature / level gauge.
What hydraulic oil filter is used on HYDMECH saws and how often should it be changed?
HYDMECH uses commercially available filters. When calling to order filters, please refer to the information listed on your current filter to obtain the proper dimensions as different sizes are used. Filters should be changed after the first 50 hours of operation and then every 500 working hours after that.
My saw runs, but I have no hydraulic functions or any pressure showing on the system pressure gauge.
Between the hydraulic pump and motor there is a bell housing containing a three-piece coupling. Inspect the coupling to see if one of the flanges has loosened and slid apart. If it is necessary to re-connect the coupling, use removable Loc-Tite on the set screws, or if the coupling is damaged, it will need to be replaced. With new saw installations, if there is no pressure showing on the system pressure gauge, it is likely that the phase wiring is backwards. Reverse any two of the three phase wires supplying power to the saw.
On my inverter driven machine the blade shuts down and will not restart.
Disconnect the supply voltage to the saw for approximately five minutes. Turn the power back on and try to restart the saw blade. If the alarm or fault code persists, check the led screen on the blade motor inverter drive for the presence of an error code, call the factory with the saw serial number, inverter model number and the error code.
My chip auger has stopped turning on my saw.
The chip auger may be jammed with a thin piece of metal. If you are unable to locate or remove the obstruction, you need to reverse the auger rotation. Lower the head fully down, shut off the hydraulics, and reverse the two conveyor hoses at the hydraulic manifold. Start the hydraulics, raise the head, and switch the head to the down position and the chip conveyor will run in reverse dislodging the piece of metal. Then put the hoses back as they were initially.
ALARM LIST MEP32 – X AXE MOTOR
99SHS Transmission/Reception94Micro zero-axe in-congruent
98SHS In-congruent reception93SHS phases short circuit
97Micro zero-behind92SHS driver over temperature
96Micro zero-axe always OFF91SHS over/under-voltage
95Micro zero-axe always ON90Non-existent phase zeroing
DRIVER STEPPER – ALARM LIST

Description

Possible Cause

d

Disable drivePress Reset. If display doesn’t show “r” letter, please check limit switch, emergency circuit,…

r

Enable and ready driveReady to march.

c

Phase motor short circuitCheck the connection on driver and motor.

u

Hi or low voltage supplyCheck the power supply voltage, transformer, connections.

t

Over temperatureCheck if fans inside the cabinet are turning properly, fuses…
Contact our Service Department today with any questions.
NEED IMMEDIATE SERVICE?

Our expert team of factory-trained service engineers can discuss machine tool repair options with you today, we can effectively minimize your downtime and keep your manufacturing process running smoothly. Look into one of our maintenance contracts to ensure quality and optimal service for all your machine fabrication needs.