HYDMECH V-18 Vertical Bandsaw

The HYDMECH V-18 Semi-automatic Vertical Band Saw is a powerhouse for every metal fabrication shop, with the ability to miter from 45° left to 45° right there’s not a job that is to difficult. This bandsaw features a 18″W x 31″H capacity, 7.5 HP motor, and 1 1/4″ blade and that makes it the perfect solution for all your vertical metal cutting applications.

Features and Benefits of The HYDMECH V-18 Band Saw

The V-18 is a semi-automatic vertical band saw and comes equipped with a 2 HP hydraulic pump that supplies system pressure through three position directional valves. An optional mist lubrication system is also available, controlling all vising, head advance/retract, blade tension, and guide arm movement.

An optional 6° degree canted head (recommended when cutting larger beams, structural steel, and bundles of square tubing) allows for more efficient cutting and improved blade life. The cast iron, torsion free saw head provides durability, stiffness, and dampens vibrations during operation.

The V-18 vertical bandsaw comes equipped with an 18″ round capacity, 18″ x 20″ rectangular capacity at 90°, 13″ round capacity at 45°, 65 – 385 sfm variable blade speed, a hydraulic blade tensioning system, hydraulic vises, hydraulic head swing, 45° left or right, 38″ table height, a hydraulic positive feed system, 5 hp main motor, 14′-6″ x 1-1/4″ blade and weighs 4,500 lbs.

Standard Features:

  • Two full stroking hydraulic vises
  • Select left or right side control panel
  • Hydraulically powered guide arm positioning
  • 5 HP VFD. True direct blade drive – no belts/pulleys
  • Hydraulic positive down feed
  • Cast iron band wheels
  • Replaceable blade brush
  • Robust steel base
  • Easy access electrical panel and hydraulics
  • Blade breakage switch
  • Hydraulic band tensioning with digital readout
  • Replaceable carbide guide inserts
  • 2 HP hydraulic pump provides system pressure
  • Safety door interlocks
  • Flood coolant with wash down hose
  • Laser light
  • Work light

Standard Options:

  • Fixed 6° canted head
  • Chip bucket
  • Hydraulic overhead bundling
  • Digital angle display
  • Mist lubrication
  • Pop-up lift roller
  • Variable vise pressure
  • Drag chain chip conveyor
  • Tall square vise inserts
  • Hydraulic chip conveyor
  • Idler conveyors
  • Powered conveyors

Detailed Specifications

Blade Dimensions1.25” x 16’11”34 mm x 4547 mm
Rectangular Capacity at 90°31” H x 18” W787 mm H x 457 mm W
Round Capacity at 90°17.5″444 mm
Blade Drive7.5 HP VFD5.6 kW VFD
Blade Speed65-385 sfm19-117 m/min
Coolant Tank Capacity20 US gal75 liters
Machine Weight4500 lbs2041 kg
Machine Dimensions80” W
120” L
97” H
4267 mm W
2844 mm L
2463 mm H

Bandsaw Parts & Info

Fabtech Solution is a trusted dealer of HYDMECH Band Saws, our service department regularly repairs and maintains wood and metal cutting bandsaw machinery. We carry complete lines of replacement blades, aftermarket parts and blade coolant. A large selection of bi-metal, grit and carbide tipped bandsaw blades as well as Fluid and Drip Lubricants. We can ship and deliver to your shop. Our Service Department will keep your saw in motion.

We've included several resources and troubleshooting guides below. This material is for reference purposes only; please contact our Service Department with any questions or concerns.

HYDMECH V-18 Semi-Automatic Band Saw

Contact our Service Department today with any questions.


What type of hydraulic oil is used on HYDMECH machines?
Texaco Rando HD46 or equivalent or machines built with Parker or Bosch Rexroth Power Packs use Shell Tellus 22 or equivalent hydraulic oil. The fill level is marked as a black line on the temperature / level gauge.
What hydraulic oil filter is used on HYDMECH saws and how often should it be changed?
HYDMECH uses commercially available filters. When calling to order filters, please refer to the information listed on your current filter to obtain the proper dimensions as different sizes are used. Filters should be changed after the first 50 hours of operation and then every 500 working hours after that.
My saw runs, but I have no hydraulic functions or any pressure showing on the system pressure gauge.
Between the hydraulic pump and motor there is a bell housing containing a three-piece coupling. Inspect the coupling to see if one of the flanges has loosened and slid apart. If it is necessary to re-connect the coupling, use removable Loc-Tite on the set screws, or if the coupling is damaged, it will need to be replaced. With new saw installations, if there is no pressure showing on the system pressure gauge, it is likely that the phase wiring is backwards. Reverse any two of the three phase wires supplying power to the saw.
On my inverter driven machine the blade shuts down and will not restart.
Disconnect the supply voltage to the saw for approximately five minutes. Turn the power back on and try to restart the saw blade. If the alarm or fault code persists, check the led screen on the blade motor inverter drive for the presence of an error code, call the factory with the saw serial number, inverter model number and the error code.
My chip auger has stopped turning on my saw.
The chip auger may be jammed with a thin piece of metal. If you are unable to locate or remove the obstruction, you need to reverse the auger rotation. Lower the head fully down, shut off the hydraulics, and reverse the two conveyor hoses at the hydraulic manifold. Start the hydraulics, raise the head, and switch the head to the down position and the chip conveyor will run in reverse dislodging the piece of metal. Then put the hoses back as they were initially.
99SHS Transmission/Reception94Micro zero-axe in-congruent
98SHS In-congruent reception93SHS phases short circuit
97Micro zero-behind92SHS driver over temperature
96Micro zero-axe always OFF91SHS over/under-voltage
95Micro zero-axe always ON90Non-existent phase zeroing


Possible Cause


Disable drivePress Reset. If display doesn’t show “r” letter, please check limit switch, emergency circuit,…


Enable and ready driveReady to march.


Phase motor short circuitCheck the connection on driver and motor.


Hi or low voltage supplyCheck the power supply voltage, transformer, connections.


Over temperatureCheck if fans inside the cabinet are turning properly, fuses…
Contact our Service Department today with any questions.

Our expert team of factory-trained service engineers can discuss machine tool repair options with you today, we can effectively minimize your downtime and keep your manufacturing process running smoothly. Look into one of our maintenance contracts to ensure quality and optimal service for all your machine fabrication needs.