HYDMECH DM-10 Double Miter Bandsaw

The DM-10 Double Miter Bandsaw has an exceptional cutting capability. This versatile saw saves operator set-up time and its compact design makes it ideal for use in tight working spaces. Its cast iron head and vises are designed for rigidity – absorbing vibrations and ensuring accuracy during cutting. A rotating table with single cut line allows head and blade groove to move together for smooth, accurate mitering.

Features and Benefits of The HYDMECH DM-10 Double Miter Bandsaw

From user-friendly operator controls, to easily accessible electrical panels and cabinets, the DM-10 double miter band saw is solidly built to provide maximum productivity.

Standard Features:

  • Manually operated easy swing, cast saw head
  • Quick release cast-iron vise with dovetail ways
  • Rotating table with cut line
  • Band tension indicator
  • Manual gravity head feed
  • Replaceable blade brush
  • Small footprint
  • Robust steel base
  • Easy to read angle scale
  • Adjustable guide arm
  • Replaceable carbide guide inserts
  • Mechanical blade tensioning
  • Safety door interlocks
  • Flood coolant
  • Work stop

Standard Options:

  • Mist lubrication
  • Pneumatic vise with foot     pedals
  • Single phase (Note: limits user to high blade speed only)
  • R2 Work stop for K110 table
  • K110 5’ infeed/out feed roller
  • Adapter Plate for K110 table

DETAILED SPECIFICATIONS

Rectangular Capacity at 90°9.5” H x 11” W241 mm H x 279 mm W
Round Capacity at 90°10″254 mm
Blade Dimensions1” x 9′ 8”25.4 mm x 2946 mm
Blade Drive2/2.5 HP VFD1.5/1.8 kW VFD
Blade Speed165-325 sfm50-99 m/min
Coolant Tank Capacity3.5 US gal13 liters
Machine Weight970 lbs439 kg
Machine Dimensions28” W
65” L
58” H
711 mm W
1651 mm L
1473 mm H

BANDSAW PARTS AND SERVICE

Fabtech Solution is a trusted dealer of HYDMECH Band Saws, our service department regularly repairs and maintains wood and metal cutting bandsaw machinery. We carry complete lines of replacement blades, aftermarket parts and blade coolant. A large selection of bi-metal, grit and carbide tipped bandsaw blades as well as Fluid and Drip Lubricants. We can ship and deliver to your shop. Our Service Department will keep your saw in motion.

We've included several resources and troubleshooting guides below. This material is for reference purposes only; please contact our Service Department with any questions or concerns.

Hyd-Mech DM10 Manual Double Miter Band Saw

Contact our Service Department today with any questions.

TROUBLESHOOTING ISSUES

What type of hydraulic oil is used on HYDMECH machines?
Texaco Rando HD46 or equivalent or machines built with Parker or Bosch Rexroth Power Packs use Shell Tellus 22 or equivalent hydraulic oil. The fill level is marked as a black line on the temperature / level gauge.
What hydraulic oil filter is used on HYDMECH saws and how often should it be changed?
HYDMECH uses commercially available filters. When calling to order filters, please refer to the information listed on your current filter to obtain the proper dimensions as different sizes are used. Filters should be changed after the first 50 hours of operation and then every 500 working hours after that.
My saw runs, but I have no hydraulic functions or any pressure showing on the system pressure gauge.
Between the hydraulic pump and motor there is a bell housing containing a three-piece coupling. Inspect the coupling to see if one of the flanges has loosened and slid apart. If it is necessary to re-connect the coupling, use removable Loc-Tite on the set screws, or if the coupling is damaged, it will need to be replaced. With new saw installations, if there is no pressure showing on the system pressure gauge, it is likely that the phase wiring is backwards. Reverse any two of the three phase wires supplying power to the saw.
On my inverter driven machine the blade shuts down and will not restart.
Disconnect the supply voltage to the saw for approximately five minutes. Turn the power back on and try to restart the saw blade. If the alarm or fault code persists, check the led screen on the blade motor inverter drive for the presence of an error code, call the factory with the saw serial number, inverter model number and the error code.
My chip auger has stopped turning on my saw.
The chip auger may be jammed with a thin piece of metal. If you are unable to locate or remove the obstruction, you need to reverse the auger rotation. Lower the head fully down, shut off the hydraulics, and reverse the two conveyor hoses at the hydraulic manifold. Start the hydraulics, raise the head, and switch the head to the down position and the chip conveyor will run in reverse dislodging the piece of metal. Then put the hoses back as they were initially.
ALARM LIST MEP32 – X AXE MOTOR
99SHS Transmission/Reception94Micro zero-axe in-congruent
98SHS In-congruent reception93SHS phases short circuit
97Micro zero-behind92SHS driver over temperature
96Micro zero-axe always OFF91SHS over/under-voltage
95Micro zero-axe always ON90Non-existent phase zeroing
DRIVER STEPPER – ALARM LIST

Description

Possible Cause

d

Disable drivePress Reset. If display doesn’t show “r” letter, please check limit switch, emergency circuit,…

r

Enable and ready driveReady to march.

c

Phase motor short circuitCheck the connection on driver and motor.

u

Hi or low voltage supplyCheck the power supply voltage, transformer, connections.

t

Over temperatureCheck if fans inside the cabinet are turning properly, fuses…
Contact our Service Department today with any questions.
FABTECH SOLUTIONS offers the most competitive pricing available.

Our Sales Department offers extensive industry knowledge and experience to help you find the best metalworking equipment and machinery for your unique solution. Whether your looking to purchase new metal fabrication equipment or used fabrication machine tools, we will source your product through our industry network.
Give us a call today! (864) 518-0629

NEED IMMEDIATE SERVICE?

Our expert team of factory-trained service engineers can discuss machine tool repair options with you today, we can effectively minimize your downtime and keep your manufacturing process running smoothly. Look into one of our maintenance contracts to ensure quality and optimal service for all your machine fabrication needs.