The Piranha C-Series Plasma Table utilizes high performance Panasonic Servo Motors and Drives that will easily run full production for many years to come. These 400 watt Servo Motors ensure high quality cuts and complete accuracy through the life of the equipment. The Piranha C-Series CNC Plasma Table is a reliable plasma cutting solution, perfect for a broad range of metal processing applications.
Drive Motors:
Drive System:
Piranha can integrate existing air plasma systems up to 125A. The customer must provide details and specifications on the existing air plasma system for review before Piranha can approve the integration. There will be a minimum charge of $1,000 for systems not supplied by Piranha. Charges for additional components, cables, and shipping may be required after review. Piranha will not provide any warranty on the existing system and will not guarantee the cut quality.
| MATERIAL THICKNESS | MAXIMUM CUTTING SPEED | |
| 10 GA MS | 181 IPM | |
| 1/4″ MS | 72 IPM | |
| 3/8″ MS | 38 IPM | |
| 1/2″MS | 24 IPM | |
| GAS TYPE | AIR | NITROGEN |
| Gas Quality | Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 | 99.95% pure |
| Recommended gas inlet flow and pressure | 400 scfh @ 85 psi (190 slpm @ 5.9 bar) | |
Power Connections for the Powermax 45XP (CSA Models)
| INPUT VOLTAGE | INPUT CURRENT AT RATED OUTPUT (A) | INPUT CURRENT AT ARC STRETCH (A) | FUSE/BREAKER SIZE (SLOW-BLOW) (A) |
| 200-240V SINGLE PHASE | 39 | 44 | 50A |
| 208V SINGLE PHASE | 37 | 43 | 50A |
| 480V THREE-PHASE | 9.4 | 17 | 20A |
| NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 809240 Revision 1 | |||
| MATERIAL THICKNESS | MAXIMUM CUTTING SPEED | |
| 10 GA MS | 224 IPM | |
| 1/4″ MS | 116 IPM | |
| 3/8″ MS | 62 IPM | |
| 1/2″ MS | 40 IPM | |
| 5/8″ MS | 26 IPM | |
| GAS TYPE | AIR | NITROGEN |
| Gas Quality | Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 | 99.995% pure |
| Recommended gas inlet flow and pressure | Cutting: 400 scfh @ 85 psi (190 slpm @ 5.9 bar) | |
Power Connections for the Powermax 65 (CSA Models)
| INPUT VOLTAGE | INPUT CURRENT AT RATED OUTPUT (A) | INPUT CURRENT AT ARC STRETCH (A) | FUSE/BREAKER SIZE (SLOW-BLOW) (A) |
| 200-208V SINGLE-PHASE | 52 | 74 | 80 |
| 230-240V SINGLE-PHASE | 44 | 74 | 80 |
| 480V SINGLE PHASE | 22 | 38 | 40 |
| 200-208V THREE-PHASE | 32 | 45 | 50 |
| 230-240V THREE-PHASE | 27 | 45 | 50 |
| 400V THREE-PHASE | 15 | 27 | 30 |
| 480V THREE-PHASE | 13 | 23 | 25 |
| 600V THREE-PHASE | 13 | 23 | 25 |
| NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 806650 Revision 3 | |||
| MATERIAL THICKNESS | MAXIMUM CUTTING SPEED | |
| 10 GA MS | 336 IPM | |
| 1/4″ MS | 164 IPM | |
| 3/8″ MS | 80 IPM | |
| 1/2″ MS | 48 IPM | |
| 5/8″ MS | 30 IPM | |
| 3/4″ MS | 24 IPM | |
| GAS TYPE | AIR | NITROGEN |
| Gas Quality | Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 | 99.995% pure |
| Recommended gas inlet flow and pressure | Cutting: 400 scfh @ 85 psi (190 slpm @ 5.9 bar) | |
Power Connections for the Powermax 85 (CSA Models)
| INPUT VOLTAGE | INPUT CURRENT AT RATED OUTPUT (A) | INPUT CURRENT AT ARC STRETCH (A) | FUSE/BREAKER SIZE (SLOW-BLOW) (A) |
| 200-208V SINGLE-PHASE | 70 | 98 | 100 |
| 230-240V SINGLE PHASE | 60 | 98 | 100 |
| 480V SINGLE PHASES | 29 | 50 | 50 |
| 200-208V THREE-PHASE | 42 | 60 | 60 |
| 230-240V THREE-PHASE | 36 | 60 | 60 |
| 400V THREE PHASE | 21 | 38 | 40 |
| 480V THREE-PHASE | 18 | 31 | 30 |
| 600V THREE-PHASE | 17 | 30 | 30 |
| NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 806650 Revision 3 | |||
| MATERIAL THICKNESS | MAXIMUM CUTTING SPEED | |
| 10 GA MS (85 amp process) | 336 IPM | |
| 1/4″ MS | 192 IPM | |
| 3/8″ MS | 116 IPM | |
| 1/2″ MS | 76 IPM | |
| 5/8″ MS | 52 IPM | |
| 3/4″ MS | 40 IPM | |
| GAS TYPE | AIR | NITROGEN |
| Gas Quality | Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 | 99.995% pure |
| Recommended gas inlet flow and pressure | Cutting: 460 scfh @ 85 psi (220 slpm @ 5.9 bar) | |
Power Connections for the Powermax 105 (CSA Models)
| INPUT VOLTAGE | INPUT CURRENT AT RATED OUTPUT (A) | INPUT CURRENT AT ARC STRETCH (A) | FUSE/BREAKER SIZE (SLOW-BLOW) (A) |
| 200V THREE-PHASE | 58 | 82 | 80 |
| 208V THREE-PHASE | 56 | 82 | 80 |
| 240V THREE-PHASE | 49 | 78 | 80 |
| 480V THREE-PHASE | 25 | 40 | 40 |
| 600V THREE-PHASE | 22 | 35 | 40 |
| NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 817390 Revision 2 | |||
| MATERIAL THICKNESS | MAXIMUM CUTTING SPEED | |
| 10 GA MS (65 amp process) | 296 IPM | |
| 1/4″ MS | 225 IPM | |
| 3/8″ MS | 138 IPM | |
| 1/2″ MS | 93 IPM | |
| 5/8″ MS | 66 IPM | |
| 3/4″ MS | 48 IPM | |
| GAS TYPE | AIR | NITROGEN |
| Gas Quality | Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 | 99.995% pure |
| Recommended gas inlet flow and pressure | Cutting: 550 scfh @ 85 psi (260 slpm @ 5.9 bar) | |
Power Connections for the Powermax 125 (CSA Models)
| INPUT VOLTAGE | INPUT CURRENT AT RATED OUTPUT (A) | INPUT CURRENT AT ARC STRETCH (A) | FUSE/BREAKER SIZE (SLOW-BLOW) (A) |
| 480V THREE-PHASE | 31 | 50 | 50 |
| 600V THREE-PHASE | 24 | 38 | 40 |
| NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 808080 Revision 3 | |||
FABTECH SOLUTIONS provides service and repair for all Piranha Plasma Tables. Ensuring high quality replacement parts and service resources is an essential component for prolonging the life and effectiveness of your metal fabrication equipment and machinery.
For your convenience, there are product manuals for your Plasma Table included below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.
Service first, then sales is the philosophy that Fabtech stands by. As a veteran owned business, we believe that anyone can sell metal fabrication equipment but our ability to service non-brand specific machinery and repair metal working equipment is what keeps us unrivaled.
©Copyright FABTECH SOLUTIONS 2024 ⁃ All Rights Reserved. Privacy Policy
Full service metal fabrication equipment distributor, specializing in metal working equipment repair or service and sales of used or new fabrication machinery.
