Veteran Owned Business

Piranha Ironworker Model P-65

Our Price: $27,995.00

The P-65 Piranha Ironworker unique automatic urethane hold downs eliminate time spent on adjustments during shear cuts, they also effectively keep flat stock and sheet metal from distorting during operation. Faster cycle times and less distortion mean value added benefits. These standard features save metal fabricators time and money, bringing value to every fab shop.

MegaFab P-65 Single Operator Ironworker

Piranha Model P-65 Ironworker is the metal fabrication industry’s most popular model of ironworker. With more standard workstations than any other ironworker in its class, the P-65 excels at punching, bending, bar shear, angle shear, and round bar shear. The integrated coper/notcher station allows fabrication operators to clean notches, make burr-free cuts, and remove the full leg from angle iron.  Piranha’s ergonomic design allows for a clear line of sight, combined with the low rake angle makes notching and coping an easy process. The P-65 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds. The P-65 has more horsepower per ton and the fastest punching stroke in the industry. Fabtech Solutions carries a large assortment of optional tooling to enhance the P-65 Ironworker, as well as all Piranha’s ironworkers. Contact our Sales Department and we’ll help find the right tool for the job.

Piranha Ironworker Standard Features:

  • Complete Punching Attachment with split dove tail mounting
  • 5 Punch and Die sets
  • Automatic Urethane Hold Down on the Punch Stripper and on Angle
  • Plate and Bar Shear
  • Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
  • Remote Electric Foot Switch that can be connected at either end of the machine
  • Electric Limit Switches that can be set for stroke control when using foot control
  • Set of Round Bar Knives [2 way] (customers choice to 1-1/2″)
  • Set of 12.125 Plate Shear Knives [4 way]
  • Set of Angle Knives [8 way top] [4 way bottom]
  • Set of Coper Knives [2 way top] [4 way bottom]
  • Chip Buckets (2 each)
  • Extra Oil Filter
  • Coupling Wrench & 3/8″ Allen Wrench
  • Integral Lifting Lug for instant portability

Detailed Specifications

Throat Depth 8″ Coper-Notcher (Tons)
(Max.)
56
2-3/4″ x 4″ x 1/4″
Open Height 13-1/2″ Bending Attachment
(Optional)
8″, 12″, 14″, 24″
Closed Height
w/o Die Block
9-1/4″ Punch End – Strokes Per Minute
Optional Speed-Up Kit
30 @ 3/4″
45 @ 3/4″
Stroke Length 4-1/4″ Work Station Height
Approx.
42″
Platen Table Size (D-W) 10″ x 17″ Hydraulics
Pump GPM
System R/V PSI
7.5
3000
Punch
Hole Size (Max. Material)
Max. Hole Size (Material)
65 Tons
1-1/16″ (3/4″)
5″ (1/8″)
Fluid Capacity (gal.) 20
Plate Shear

*with fixed hold down
15-1/2″ Long
*1″ x 4″
3/4″ x 10″
5/8″ x 15″
Motor Std. 230/460 3 Ph. 1800 RPM
Opt Phase & Voltage Available
7.5 HP 3 Ph.
Angle Shear
** with special blade
5″ x 5″ x 3/8″
**4″ x 4″ x 1/2″
Dimensions (Net)
W-L-H Approx.
24″ x 66″ x 60″
Bar Shear
Round (min. to max.)
Square (min. to max.)
1/4″ to 1-1/2″
1/2″ to 1″
Weight (Net)
Lbs. Approx.
2600

Repair & Service

Operators Manual
Piranha Ironworker
Maintenance Checklist
Ironworker Preinstallation
Checklist
Ironworker Parts, Filter List
thumbnail of Ironworker_Punch_Tonnage_Chart
Ironworker Punch
Tonnage Chart

Ironworker Optional Attachments

Common Attachments

Still looking for what you need?