Piranha Ironworker PII-140 Dual Operator
Our Price $63,900.00
The Dual Operator Piranha PII-140 allows for simultaneous operation of the punch station and shear/coper-notcher stations. One of the most powerful ironworkers on the market, providing enough punching force for any application and with dual operators, it’s also one of the most productive.
MegaFab PII-140 Dual Operator Ironworker
The most powerful hydraulic ironworker for sale with dual operator features. The Punch and Shear/Coper work stations can work independently of each other. The PII-140 is like having two machines in one and continues to be a fixture in every metal fabrication shop. The PII-140 ironworker is ideal for metal fabrication and metalworking applications that require more tonnage and increased productivity. The unit can be started and stopped with the push of a button, from either end of the ironworker. The machine is controlled by a convenient 3 position, momentary, joystick; releasing the joystick returns the machine to a neutral position. The PII-140 Dual Operator ironworker can also be controlled by a remote foot control.
Piranha Ironworker Standard Features:
- Complete Punching Attachment with stripper
- 5 Punch and Die sets
- Automatic Urethane Hold Down on the Plate, Angle, and Bar Shear
- Front and rear 2 position joy stick controls (electric)
- Front and rear Remote Electric Foot Switches
- Front limit switch stroke control
- Set of Round Bar Knives [2 way] (customers choice to 2″)
- Set of 14.5″ Plate Shear Knives [4 way]: For PII-110
- Set of 16.625″ Plate Shear Knives [4 way]: For PII-140
- Set of 20.5″ Plate Shear Knives [4 way] instead of Round Bar Knives and 16.625″ Plate Shear
- Knives: For PII-140
- Extra Blank Knife to extend shear to 18″ on PII-110 or 20.5″ on PII-140
- Set of Coper Knives [2 way top] [4 way bottom]
- Set of Angle Shear Knives [2 way top] [4 way bottom]
- Chip Buckets (coper end)
- Extra Oil Filter
- Coupling Wrench
- Intergral Lifting Lug for instant portability
|Throat Depth||20.5″||Coper-Notcher (Tons) (Max. Material)||95 4″ x 6″ x 3/8″|
|Open Height||14″||Bending Attach. (Optional)||18″, 24″, 36″, 48″|
|Closed Height w/o Die Block||7-3/4″||Punch End Strokes Per Minute||24 @ 1″|
|Stroke Length||7″||Work Station Height Approx.||44″|
|Platen Table Size (D-W)||16″ x 36″||Hydraulics Pump GPM System R/V PSI||15 3500|
|Punch Hole Size (Max. Material) Max. Hole Size (Material)||140 Tons 1-3/8″ (1-1/4″) 5″ (5/16″)||Fluid Capacity (gal.)||40|
|Plate Shear||20-1/2″ Long 1″ x 14″ 3/4″ x 18″ 1/2″ x 20″||Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available||20 HP 3 Ph.|
|Angle Shear||6″ x 6″ x 5/8||Dimensions (Net) W-L-H Approx.||38″ x 120″ x 85″|
|Bar Shear Round (min. to max.) Square (min. to max.)||1/2″ to 2″ 1/2″ to 1-3/8″||Weight (Net) Lbs. Approx.||11,930|
REPAIR AND SERVICE MANUALS
FABTECH SOLUTIONS provides service and repair for all MegaFab Piranha Ironworkers. Ensuring high quality replacement parts and service resources is an essential component for prolonging the life and effectiveness of your metal fabrication equipment and machinery.
For your convenience, there are instruction and service manuals for your Ironworker included below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.
Genuine Ironworker Tooling & Piranha Attachments
FABTECH SOLUTIONS application expertise extends beyond the ironworker and into the tooling and accessories that make an ironworker perform unique functions for each application. As a Genuine Piranha Irownworker dealer, FABTECH SOLUTIONS carries a wide variety of Piranha tooling for all makes and models of ironworkers. Standard sizes of ironworker tooling are in stock and, usually, available for same-day shipment.
We understand that every machine shop must be flexible with it's application development, and your ironworker can only be as flexible as the tooling you use.