Piranha Ironworker PII-88 Dual Operator
Our Price $37,900.00
The Dual Operator Piranha PII-88 allows for simultaneous operation of the punch station and shear/coper-notcher stations. This ironworker will double your production capacity with dual operation and plenty of advanced features, like the Automatic Urethane Hold Down on the Plate and Angle Shear.
MegaFab PII-88 Dual Operator Ironworker
The most versatile hydraulic ironworker on the market; with dual operator features. The Punch and Shear/Coper work stations can work independently of each other. The PII-88 is like having two machines in one and continues to be a fixture in every metal fabrication shop. The PII-88 ironworker is ideal for metal fabrication and metalworking applications that require more tonnage and increased productivity. The unit can be started and stopped with the push of a button, from either end of the ironworker. The machine is controlled by a convenient 3 position, momentary, joystick; releasing the joystick returns the machine to a neutral position. The PII-88 Dual Operator ironworker can also be controlled by a remote foot control.
Piranha Ironworker Standard Features:
- Complete Punching Attachment with stripper
- 5 Punch and Die sets
- Front and rear 2 position joy stick controls (electric)
- Front and rear Remote Electric Foot Switches
- Front limit switch stroke control
- Set of Round Bar Knives [2 way] (customers choice to 1-1/2″)
- Set of 20.625″ Plate Shear Knives [4 way]
- Set of Blank Knives to extend shear to 24″
- Set of Coper Knives [2 way top] [4 way bottom]
- Set of Angle Shear Knives [8 way top] [4 way bottom]
- Chip Buckets (coper end)
- Extra Oil Filter
- Coupling Wrench
- Intergral Lifting Lug for instant portability
DETAILED SPECIFICATIONS
| Throat Depth | 9″ | Coper-Notcher (Tons) (Max.) | 56 2-3/4″ x 4″ x 1/4″ |
| Open Height | 14″ | Bending Attach. (Optional) | 24″, 36″, 48″ |
| Closed Height w/o Die Block | 7-3/4″ | Punch End Strokes Per Minute | 19 @ 1″ |
| Stroke Length | 7″ | Work Station Height Approx. | 41″ |
| Platen Table Size (D-W) | 11″ x 38″ | Hydraulics Pump GPM System R/V PSI | 7.5 3500 |
| Punch Hole Size (Max. Material) Max. Hole Size (Material) | 88 Tons 1-1/16″ (1″) 5″ (3/16″) | Fluid Capacity (gal.) | 20 |
| Plate Shear | 24″ Long 3/4″ x 8″ 5/8″ x 12″ 1/4″ x 24″ | Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available | 10 HP 3 Ph. |
| Angle Shear | 5″ x 5″ x 3/8 **4″ x 4″ x 1/2″ | Dimensions (Net) W-L-H Approx. | 38″ x 90″ x 72″ |
| Bar Shear Round (min. to max.) Square (min. to max.) | 1/4″ to 1-1/2″ 1/2″ to 1″ | Weight (Net) Lbs. Approx. | 4700 |
REPAIR AND SERVICE MANUALS
FABTECH SOLUTIONS provides service and repair for all MegaFab Piranha Ironworkers. Ensuring high quality replacement parts and service resources is an essential component for prolonging the life and effectiveness of your metal fabrication equipment and machinery.
For your convenience, there are instruction and service manuals for your Ironworker included below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.
TOOLING AND ATTACHMENTS
FABTECH SOLUTIONS application expertise extends beyond the ironworker and into the tooling and accessories that make an ironworker perform unique functions for each application. As a Genuine Piranha Irownworker dealer, FABTECH SOLUTIONS carries a wide variety of Piranha tooling for all makes and models of ironworkers. Standard sizes of ironworker tooling are in stock and, usually, available for same-day shipment.
We understand that every machine shop must be flexible with it's application development, and your ironworker can only be as flexible as the tooling you use.
Piranha Ironworker Optional Tooling and Attachments
Pipe/Tube Notching Attachment
- Mounts easily to platen
- Spring-loaded return
- Standard base die accommodates several die sizes
- Allows single notch in Schedule 40 pipe 3/4" through 2" diameter*
- Notching dies available for 3/4", 1", 1-1/4", 1-1/2", 2"
- Attaches to punch end of ironworker
Bending Attachments
- Optional sizes range from 8" to 48". See specifications chart for sizes available for each model.
Press Brake Tooling Holders
- Available for all Piranha Ironworkers
- Allows use of press brake punches and dies for precision bending
- Lengths up to 24"
- Accepts a 1/2" wide by 5/8" tall tang (tooling sold separately)
Quickset Gauging Tables
- Fast set-up for punching multiple holes
- Includes plate and angle-gauging guide bars
- Left and right hand extensions available in 5’ and 10’ lengths
- Gauging table mounts on machine platen table without removing punch attachment or die block
- Table and guide bars have measuring rules
- All models have 3 left-hand stops on the table and 6 stops (3 left-hand and 3 right-hand) on the angle guide bar
Channel Shear
- Attaches to punch end of ironworker in place of standard punch holder
- Each cut removes 1/2" slug from standard weight channel
- Slug slides out the front of the shear after each cut
- Pinned slide block adjusts to accommodate different widths of channel
- Quick release locking handle secures material
Mechanical Backgauges
- Allows quick set-up to repeat shearing length with a mechanical backstop
- Positions in angle, plate and round bar sections
- Lengths available—3’, 6’, 9’, 12’
- Bolts on with no machine modifications
- Easy access of sheared material
- Backgauge allows for infinite adjustment
- Compression sleeve for positive locking and no marring of the gauge bar
Bar Bender
- Up to 2-1/2" depending on available tonnage
- Adjustable die for different radii
1-1/2 Oversize Punch Attachment
- Punches up to 1-9/16" hole within capacity limits of the machine
- Mounts in place of standard punch holder and die block
- Use same stripper action as standard punch attachment
- Use No. EF punches and No. JF dies
Roller Feed Tables
- For fast, easy feeding of bar, plate and angle
- Available in 5’ increments—bolt together for longer lengths
- Adjust to accommodate floor height and machine type
- Includes rollers for angle and flat bar sections
- 20" wide flat rollers; 6" angle rollers
