TRUMPF TruTool C 160 Slitting Shears with Chip Breaker
The TRUMPF TruTool C 160 Slitting Shear with the integrated chip breaker is an ideal sheet metal tool for any metal fabrication shop. A cordless slitting shear this hand held shear easily makes it’s way through spiral tubing, sheet metal pieces and stainless steel with distortion free cutting. Ergonomically designed with comfort in mind, this sheet metal tool makes it easy.
Experience The TruTool C 160 Slitting Shears with Chip Breaker
TruTool C 160 with integrated chip breaker is especially suitable for notching tasks and interior cutouts. The chip can be clipped at any point. You can pull the machine out of the workpiece at any time and replace it precisely. The TruTool C 160 with chip breaker is attractive because it produces distortion-free, high quality cuts.
Power-Head-Technology: The slitting shear is now also available as Li-Ion battery. Many details in the gear head are tailored to the voltage of the battery technology and enable the 10,8 volt battery to produce output that is comparable to a 14,4 volt battery.
They protect the surface. The view of the workpiece is optimal and makes your work easier. With the optional parallel stop, you can cut strips from 35 to 300 mm precisely.
The alternative with integrated chip breaker
- Integratet chip breaker for two-handed operation; ideal for inner contours and notchings
- Light weight, ergonomic, handy
- Machine available as electric version as well Li-Ion-battery
- Ventilation works and climate control technology (spiral-seam tubes)
- House-front construction
- Construction, including separation of C-L-U profiles
|TRUMPF Slitting Shears||TruTool C 160 with chip breaker (230V)||TruTool C 160 wit chip breaker (110V)||TruTool C 160 with chip breaker cordless|
|Cutter (further cutters available)||Cutter for 1 – 1,6 mm sheet thickness||Cutter for 1 – 1,6 mm sheet thickness||Cutter for 1 – 1,6 mm sheet thickness|
|Max. material thickness|
|1.6 mm||1.6 mm||1.6 mm|
|1.2 mm||1.2 mm||1.2 mm|
|2 mm||2 mm||2 mm|
|Working speed||6 m/min – 10 m/min||6 m/min – 10 m/min||5 m/min – 9 m/min|
|Start hole diameter||15 mm||15 mm||15 mm|
|Smallest radius||90 mm||90 mm||90 mm|
|Rated input power||350 W||350 W|
|Strokes at nominal load||3800 RPM||3800 RPM||2500 RPM|
|Weight (electric: without cable; battery: with battery)||1.4 kg||1.4 kg||1.6 kg|
|Motor capacity||10.8 V|
|Straight cutter 1 – 1.6 mm||DIN 911-22.5||integrated|
|Cut guides (2 pieces with screws)||integrated|
|Hex head wrench||0067822|
|* Battery (2 pieces)||10,8 V / 2 Ah||included|
|*Charger||100 – 240 V||1886527|
|*Belt clip||100 – 240 V||1886524|
|Straight cutter 1 – 1.6 mm||(set of 2, 1264343)||(set of 5, 1264345)|
|Straight cutter 1 mm||(set of 2, 1264358)||(set of 5, 1264357)|
|Curve cutter||(set of 2, 1264356)||(set of 5, 1264359)|
|CR cutter||(set of 2, 1264346)||(set of 5, 1264347)|
|Cut guides (2 pieces with screws)||TruTool C 160||0913520|
|Spare parts set (1 x cut guide, 1 x chip clipper)||Set of 21264346||0927709|
|Spare blades (1 x 143432, 1 x 143434)||0913521|
|Chip breaker||(set of 1, 0143950)||(set of 2, 1264370)|
|*Battery (1 piece)||10,8 V / 2 Ah||1886525|
|Battery (1 piece)||10,8 V / 4 Ah||1886526|
|Lubricating grease “G1”||25 g||0344969|
FABTECH SOLUTIONS is a proud distributor of Trumpf Power Tools. Our Service Department can assist with finding the right tool for the job. Ensuring high quality equipment, training and service resources is an essential component for prolonging the life and effectiveness of your sheet metal fabrication power tools and machinery.
For your convenience, there are instruction and service manuals for your Trumpf TruTools included below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.
TRUMPF Slitting Shears