Piranha_Ironworker_P-90

Piranha Ironworker Model P-90

The P-90 Piranha Ironworker dovetail slide allows steel fabricators to switch from punching to bending, easily and efficiently. Metalworking machine shops everywhere have come to appreciate Piranha’s Quick-Change Tooling. Likewise, the urethane strippers almost eliminate part distortion, while minimizing stroke length. These standard features, plus more horsepower per ton, is why Piranha Ironworker machines lead the competition.

MegaFab P-90 Single Operator Ironworker

The most versatile hydraulic ironworker on the market; with critical features such as urethane stripping, automatic shear hold-downs, quick change tooling, low blade rake angles, and six standard work stations. The Piranha Ironworker P-90 continues to be a fixture in every metal fabrication shop.  The P-90 ironworker is ideal for metal fabrication and metalworking applications that require more tonnage. The P-90 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds, increasing productivity and cycle times. The Piranha P-90 allows for full electrical control via a convenient foot switch.

The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-90’s capabilities. Piranha’s standard integrated coper and notcher workstation allows operators to notch from thick to thin, remove the full leg from angle iron, all while maintaining total control of the part. The ironworker is a value added benefit to any machine fabrication shop.

Piranha Ironworker Standard Features:

  • Complete Punching Attachment with split dove tail mounting
  • 5 Punch and Die sets
  • Automatic Urethane Hold Down on the Punch Stripper and on Angle
  • Plate and Bar Shear
  • Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
  • Remote Electric Foot Switch that can be connected at either end of the machine
  • Electric Limit Switches that can be set for stroke control when using foot control
  • Set of Round Bar Knives [2 way] (customers choice to 2)
  • Set of 14.50 Plate Shear Knives [4 way]
  • Extra Blank Knife to extend shear to 18″
  • Set of Angle Knives [8 way top] [4 way bottom]
  • Set of Coper Knives [2 way top] [4 way bottom]
  • Chip Buckets (2 each)
  • Extra Oil Filter
  • Coupling Wrench & 3/8″ Allen Wrench
  • Integral Lifting Lug for instant portability

 

Product Sections:

Detailed Specifications

Throat Depth 10″ Coper-Notcher (Tons)
(Max.)
75
3-1/2″ x 5″ x 3/8″
Open Height 15″ Bending Attachment
(Optional)
12″, 24″
Closed Height
w/o Die Block
10-1/8″ Punch End – Strokes Per Minute
Optional Speed-Up Kit
32 @ 3/4″
45 @ 3/4″
Stroke Length 4-7/8″ Work Station Height
Approx.
42″
Platen Table Size (D-W) 12″ x 21″ Hydraulics
Pump GPM
System R/V PSI
10.5
2900
Punch
Hole Size (Max. Material)
Max. Hole Size (Material)
90 Tons
1-1/8″ (1″)
5″ (3/16″)
Fluid Capacity (gal.) 25
Plate Shear 18″ Long
1″ x 8″
3/4″ x 12″
1/2″ x 18″
Motor Std. 230/460 3 Ph.
1800 RPM
Opt Phase & Voltage Available
10 HP 3 Ph.
Angle Shear 5″ x 5″ 1/2″ Dimensions (Net)
W-L-H Approx.
31″ x 79″ x 64″
Bar Shear
Round (min. to max.)
Square (min. to max.)
1/2″ to 2″
1/2″ to 1-3/8″
Weight (Net)
Lbs. Approx.
4250

Tooling / Attachments

FABTECH SOLUTIONS application expertise extends beyond the ironworker and into the tooling and accessories that make an ironworker perform unique functions for each application. As a Genuine Piranha Irownworker dealer, FABTECH SOLUTIONS carries a wide variety of Piranha tooling for all makes and models of ironworkers. Standard sizes of ironworker tooling are in stock and, usually, available for same-day shipment.

We understand that every machine shop must be flexible with it's application development, and your ironworker can only be as flexible as the tooling you use.

Piranha Ironworker Optional Tooling and Attachments

Pipe/Tube Notching Attachment

Piranha Tooling - Pipe Tube Notching Attachment
  • Mounts easily to platen
  • Spring-loaded return
  • Standard base die accommodates several die sizes
  • Allows single notch in Schedule 40 pipe 3/4" through 2" diameter*
  • Notching dies available for 3/4", 1", 1-1/4", 1-1/2", 2"
  • Attaches to punch end of ironworker

Bending Attachments

Piranha Tooling - Bending Attachments
  • Optional sizes range from 8" to 48". See specifications chart for sizes available for each model.

Press Brake Tooling Holders

Piranha Tooling - Press Brake Tooling Holders
  • Available for all Piranha Ironworkers
  • Allows use of press brake punches and dies for precision bending
  • Lengths up to 24"
  • Accepts a 1/2" wide by 5/8" tall tang (tooling sold separately)

Quickset Gauging Tables

Piranha Tooling - Quickset Gauging Tables
  • Fast set-up for punching multiple holes
  • Includes plate and angle-gauging guide bars
  • Left and right hand extensions available in 5’ and 10’ lengths
  • Gauging table mounts on machine platen table without removing punch attachment or die block
  • Table and guide bars have measuring rules
  • All models have 3 left-hand stops on the table and 6 stops (3 left-hand and 3 right-hand) on the angle guide bar

Channel Shear

Piranha Tooling - Channel Shear
  • Attaches to punch end of ironworker in place of standard punch holder
  • Each cut removes 1/2" slug from standard weight channel
  • Slug slides out the front of the shear after each cut
  • Pinned slide block adjusts to accommodate different widths of channel
  • Quick release locking handle secures material

Mechanical Backgauges

Piranha Tooling - Mechanical Backgauges
  • Allows quick set-up to repeat shearing length with a mechanical backstop
  • Positions in angle, plate and round bar sections
  • Lengths available—3’, 6’, 9’, 12’
  • Bolts on with no machine modifications
  • Easy access of sheared material
  • Backgauge allows for infinite adjustment
  • Compression sleeve for positive locking and no marring of the gauge bar

Bar Bender

Piranha Tooling - Bar Bender
  • Up to 2-1/2" depending on available tonnage
  • Adjustable die for different radii

1-1/2 Oversize Punch Attachment

Piranha Tooling - Oversize Punch Attachment
  • Punches up to 1-9/16" hole within capacity limits of the machine
  • Mounts in place of standard punch holder and die block
  • Use same stripper action as standard punch attachment
  • Use No. EF punches and No. JF dies

Roller Feed Tables

Piranha Tooling - Roller Feed Tables
  • For fast, easy feeding of bar, plate and angle
  • Available in 5’ increments—bolt together for longer lengths
  • Adjust to accommodate floor height and machine type
  • Includes rollers for angle and flat bar sections
  • 20" wide flat rollers; 6" angle rollers
Plus much more... Contact our Service Department today, to find the right tool for the job.

Repair & Service

FABTECH SOLUTIONS provides service and repair for all MegaFab Piranha Ironworkers. Ensuring high quality replacement parts and service resources is an essential component for prolonging the life and effectiveness of your metal fabrication equipment and machinery.

For your convenience, there are instruction and service manuals for your Ironworker included below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.

FABTECH SOLUTIONS offers the most competitive pricing available.

Our Sales Department offers extensive industry knowledge and experience to help you find the best metalworking equipment and machinery for your unique solution. Whether your looking to purchase new metal fabrication equipment or used fabrication machine tools, we will source your product through our industry network.
Give us a call today! (864) 518-0629