trumpf-trutool-f-140

Trumpf TruTool F 140 Seam Locker

The Trumpf TruTool F 140 Seam Locker is an exceptional seam closer, well designed to operate on large workpieces, this seam locker is an essential tool for any metal fabrication shop. No extra tools needed when setting the tool height for the thickness of your metal sheets, no distortion of the work area and no hammering needed to ensure an airtight closure.

FREE SHIPPING!!!

$2,600.00

trumpf-trutool-f-140-1trumpf-trutool-f-140-2
SKU: 1942397 Category:

Advantages of the TruTool F 140 Seam Locker

TruTool F 140 can also be used for stainless steel and is very well-suited for processing large radii. TruTool F 140 works on a continuous roll forming principle, thus ensuring air-tight closure without hammering. This permits processing of straight and curved sheets up to 1.4 mm. The surface structure is not damaged. The seam closer functions with an automatic infeed, which means that you can proceed without the use of force. Pre-settings can be made for sheet thickness without the use of tools.

High seam quality in curved and straight sheets, even in stainless steel

  • Closes Pittsburgh seams on straight and radius duct up to 1.4 mm sheet thickness
  • High performance on stainless steel applications
  • No refitting when processing formed or folded pieces
  • Electronic speed controller for optimal working speed
  • Machine available as electric-version

Applications

  • Heating and ventilation works
  • Chimney works
  • House-front construction
  • Industrial ventilators

Product Sections:

DETAILED SPECIFICATIONS

Trumpf Seam Locker TruTool F 140 (230V) TruTool F 140 (110V)
Max. material thickness
  • Steel 400 / mm²
1.4 mm 1.4 mm
  • Steel 600 / mm²
0.6 mm 0.6 mm
Edge length (H) 10 mm – 15 mm 10 mm – 15 mm
Flange height (B) 13 mm 13 mm
Clearance (C) 2.5 mm 2.5 mm
Working speed 6 m/min – 10 m/min 6 m/min – 10 m/min
Smallest inner radius (preformed) 300 mm 300 mm
Smallest outer radius 500 mm 500 mm
Rated input power 500 W 500 W
Weight (electrical version: without cable, cordless version: with battery) 4.2 kg 4.2 kg
Accessories included
Form piece, complete 0.6 – 1 mm 0110327
Distance plate 0020214
Clipper device 0247536
Carrying case included
Additional accessories
Drive roll 0003523
Feeler ring roll 1 – 1,4 mm 0023181
Form piece complete 0110331
Carbon brush (set of 2) 0358020

SERVICE MANUALS

FABTECH SOLUTIONS is a proud distributor of Trumpf Power Tools. Our Service Department can assist with finding the right tool for the job. Ensuring high quality equipment, training and service resources is an essential component for prolonging the life and effectiveness of your sheet metal fabrication power tools and machinery.

For your convenience, there are instruction and service manuals for your Trumpf TruTools included below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.

Trumpf Seam Locker

FABTECH SOLUTIONS offers the most competitive pricing available.

Our Sales Department offers extensive industry knowledge and experience to help you find the best metalworking equipment and machinery for your unique solution. Whether your looking to purchase new metal fabrication equipment or used fabrication machine tools, we will source your product through our industry network.
Give us a call today! (864) 518-0629