trumpf-trutool-n-1000

Trumpf TruTool N 1000

The Trumpf TruTool N 1000 Power Nibbler was specially designed for use with thick sheet metals, stainless steel and plate metal. Its primary use is in dismantling containers and tanks, but also during container construction as well. It’s ability to cut over edges, weld seams and through double sheets. This is a powerful nibbler that will find a use in any metal fabrication shop.

FREE SHIPPING!!!

$6,200.00

trumpf-trutool-n-1000-2trumpf-trutool-n-1000-3
SKU: 0112890 Category:

Durable and Efficient, The Trumpf TruTool N 1000

The Trumpf TruTool N 1000 was designed especially for use with thick sheets. It is used primarily for dismantling tanks and containers. It handles cuts over edges, weld seams and doubled sheets like no other. With the two-speed drive, you can work with a maximal sheet thickness of 10 mm at low speed. In second gear, the nibbler works through the sheet faster and can handle a material thickness of 8 mm.

Although the thick sheet nibbler weighs 14.7 kg, it is very convenient to work with, thanks to well-engineered grip ergonomics. The grip can be mounted in two different positions,allowing you to adapt to the task at hand.

Our most powerful thick sheet nibbler

  • 4 cutting directions for hard to reach jobs
  • 2-speed gearbox for the highest loads
  • Machine available as electric-version

Applications

  • Metal fitting shops/Recesses and fitting work
  • Disassembly of tanks and containers
  • Roof and fasade construction
  • Container construction
  • Car-body shops

 

Product Sections:

DETAILED SPECIFICATIONS

Power Nibbler TruTool N 1000 (230V) TruTool N 1000 (110V)
1st gear 230 RPM 190 RPM
2nd gear 370 RPM 330 RPM
Rated input power 2000 W 2000 W
Weight (electrical version: without cable, cordless version: with battery) 14.7 kg 14.7 kg
Max. material thickness in 1st gear
  • Steel 400 N / mm²
10 mm
  • Steel 600 N / mm²
7 mm
  • Steel 800 N / mm²
5 mm
  • Aluminium 250 N / mm²
12 mm
Max. material thickness in 2nd gear
  • Steel 400 N / mm²
8 mm
  • Steel 600 N / mm²
5 mm
  • Steel 800 N / mm²
4 mm
  • Aluminium 250 N / mm²
10 mm
Start hole diameter 75 mm
Smallest radius 300 mm
Accessories included
Punch integrated
Die 10 integrated
Grip 0103555
Hex head wrench DIN 911-12 0067920
Hex head wrench 6mm 6 mm 0118860
Tube grease “S1” 25 g 0121486
Punch and nibble oil for steel 500 ml bottle 0103387
Setting gauge 1411767
Additional accessories
Punch Standard (set of 2, 1264155) (set of 5, 1264156)
Punch CR (set of 2, 1264412) (set of 5, 1264413)
Die P10 for profile sheets (1 piece, 1884903) (set of 2, 1264185)
Die 5 5 mm 1884909
Die 7 (5 – 7 mm) (1 piece, 1884905) (set of 2, 1264184)
Die 10 (1 piece, 1884904) (set of 2, 1264177)
Punch guide (1 piece, 1884906) (set of 2, 1264368)
Wear plate (set of 2, 1264375) (set of 5, 1264376)
Options (accessories)
Chip bag 0115215
Hanging hook 0105001
Punch and nibble oil for steel 500 ml bottle 0103387
Punch and nibble oil for aluminum 1000 ml bottle 0125874
Carrying case 0121585
Noise absorption for motor pneumatic 0114244

SERVICE MANUALS

FABTECH SOLUTIONS is a proud distributor of Trumpf Power Tools. Our Service Department can assist with finding the right tool for the job. Ensuring high quality equipment, training and service resources is an essential component for prolonging the life and effectiveness of your sheet metal fabrication power tools and machinery.

For your convenience, there are instruction and service manuals for your Trumpf TruTools included below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.

Trumpf TruTool Nibblers

FABTECH SOLUTIONS offers the most competitive pricing available.

Our Sales Department offers extensive industry knowledge and experience to help you find the best metalworking equipment and machinery for your unique solution. Whether your looking to purchase new metal fabrication equipment or used fabrication machine tools, we will source your product through our industry network.
Give us a call today! (864) 518-0629