Trumpf TruTool N 700 Power Nibbler

The Trumpf TruTool N 700 Power Nibbler is a portable and light weight metal cutting tool, weighing in at only 18lbs, this tool is great for overhead and hard to reach areas. The overall design of this power nibbler is exceptional, aside from the comfortable ergonomic design, the handle can be rotated and locked into 3 different positions.



SKU: 1773545 Category:

Benefits of the TruTool N 700 Power Nibbler

A further advantage that improves mobility is the rotating motor handle. This can be locked in three positions. This allows you the best working position in tight and hard-to-reach spots. With a weight of about 8 kg, the TruTool N 700 is a light weight in a sheet thickness range up to 7 mm. It cuts double sheets and bends up to 90°, which suits it for dismantling tanks and containers. So that you can take on very varied jobs, there are two quickly exchangeable grips.

Our light-weight tool in the sheet thickness range up to 7 mm

  • 4 cutting directions
  • Two different grips for optimal handling especially in hard-to-reach work areas
  • High operating comfort thanks to adjustable motor handle
  • Machine available as electric-version


  • Metal fitting shops/Recesses and fitting work
  • Disassembly of tanks and containers
  • Roof and fasade construction
  • Container construction
  • Car-body shops

Product Sections:


 Profile Nibbler TruTool N 700 (230V) TruTool N 700 (110V)
Max. material thickness
  • Steel 400 / mm²
7 mm 7 mm
  • Steel 600 / mm²
5 mm 5 mm
  • Steel 800 / mm²
3.5 mm 3.5 mm
  • Aluminium 250 / mm²
10 mm 10 mm
Working speed 1.3 m/min 1.1 m/min
Start hole diameter 50 mm 50 mm
Smallest radius 140 mm 140 mm
Rated input power 1600 W 1500 W
Strokes at nominal load 300 RPM 260 RPM
Weight (electrical version: without cable, cordless version: with battery) 8.3 kg 8.3 kg
Accessories included
Punch standard integrated
Die 7 integrated
Bow handle 1279590
Compact handle 1279618
Hex head wrench DIN 911-5 0067857
Tube grease “G1” 25 g 0344969
Setting gauge 1411767
TRUMPF Box 1763686
Additional accessories
Punch Standard (set of 2, 1264117) (set of 5, 1264119)
Punch CR (set of 2, 1264414) (set of 5, 1264415)
Die P7 for profile sheets 5 – 7 mm (set of 1, 0098721) (set of 2, 1264174)
Die 5 (set of 1, 0098723) (set of 2, 1264173)
Die 7 (5-7 mm) 1 pce. 0098722 (set of 2, 1264137) (set of 5, 1264139)
Wear plate (set of 2, 1264373) (set of 5, 1264374)
Punch guide (set of 1, 1274571) (set of 2, 1264366)
Options (accessories)
Chip bag 0109275
Punch and nibble oil for steel 500 ml bottle 0103387
Punch and nibble oil for aluminum 1000 ml bottle 0125874
Roller guide complete 1284047


FABTECH SOLUTIONS is a proud distributor of Trumpf Power Tools. Our Service Department can assist with finding the right tool for the job. Ensuring high quality equipment, training and service resources is an essential component for prolonging the life and effectiveness of your sheet metal fabrication power tools and machinery.

For your convenience, there are instruction and service manuals for your Trumpf TruTools included below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.

Trumpf TruTool Nibblers

FABTECH SOLUTIONS offers the most competitive pricing available.

Our Sales Department offers extensive industry knowledge and experience to help you find the best metalworking equipment and machinery for your unique solution. Whether your looking to purchase new metal fabrication equipment or used fabrication machine tools, we will source your product through our industry network.
Give us a call today! (864) 518-0629