trumpf-trutool-c-160

Trumpf TruTool C 160 Slitting Shear

The Trumpf TruTool C 160 Slitting Shear is an exceptional piece of equipment and a great addition to your stock of sheet metal tools. This slitting shear comes without the integrated chip breaker which provides a wide open view of the working area. There are many advantages to this slitting shear besides just visibility, the Trumpf guarantee of quality is behind every tool offered.

FREE SHIPPING!!!

$800.00

trumpf-trutool-c-160-1trumpf-trutool-c-160-2trumpf-trutool-c-160-3
SKU: 1773319 Category:

The Benefits of The TruTool C 160 Slitting Shear

Power-Head-Technology: The slitting shear is now also available as Li-Ion battery. Many details in the gear head are tailored to the voltage of the battery technology and enable the 10,8 volt battery to produce output that is comparable to a 14.4 volt battery.

TruTool C 160 without chip breaker provides you with an open view onto the workpiece, permitting precise cutting according to the plan. And that is true for curves as well. The cuts are free of distortion and the quality is high. There is no reworking. We offer you a great variety of blades that were developed for a variety of applications. They can be simply exchanged in seconds with a single move. With the optional parallel stop, you can cut strips from 35 to 300 mm precisely.

Accurate starting and cutting

  • Light weight, ergonomic, handy
  • Small start hole diameter
  • Machine available as electric version as well Li-Ion-battery

Applications

  • Ventilation works and climate control technology (Spiral-seam tubes)
  • House-front construction
  • Construction, including separation of C-L-U profiles
  • Plumbers
  • Coil-application

 

Product Sections:

DETAILED SPECIFICATIONS

Trumpf Slitting Shears TruTool C 160 (230V) TruTool C 160 (110V) TruTool C 160 (Akku)
Cutter (further cutters available) Cutter for 1 – 1,6 mm sheet thickness Cutter for 1 – 1,6 mm sheet thickness Cutter for 1 – 1,6 mm sheet thickness
Max. material thickness
  • Steel 400 / mm²
1.6 mm 1.6 mm 1.6 mm
  • Steel 600 / mm²
1.2 mm 1.2 mm 1.2 mm
  • Aluminium 250 / mm²
2.0 mm 2.0 mm 2 mm
Working speed 6 m/min – 10 m/min 6 m/min – 10 m/min 5 m/min – 9 m/min
Start hole diameter 15 mm 15 mm 15 mm
Smallest radius 90 mm 90 mm 80 mm
Rated input power 350 W 350 W
Strokes at nominal load 3800 RPM 4200 RPM 2500 RPM
Weight (electric: without cable; battery: with battery) 1.4 kg 1.4 kg 1.9 kg
Motor capacity 10.8 V
Accessories included
Straight cutter 1 – 1.6 mm DIN 911-22.5 integrated
Cut guides (2 pieces with screws) integrated
Hex head wrench DIN 911-22.5 0067822
*Battery (2 pieces) 10,8 V / 2 Ah 1886525
*Charger 100 – 240 V 1886527
*Belt clip 100 – 120 V, 36 min. 1886524
TRUMPF Box 1763681
Additional accessories
Straight cutter 1 – 1.6 mm (set of 2, 1264343) (set of 5, 1264345)
Straight cutter 1 mm (set of 2, 1264356) (set of 5, 1264357)
Curve cutter (set of 2, 1264358) (set of 5, 1264359)
CR cutter (set of 2, 1264346) (set of 5, 1264347)
Spare blades (1 x 143432, 1 x 143434) TruTool C 160 0913521
Cut guides (2 pieces with screws) 0913520
Spare parts set (1 x cut guide, 1 x chip clipper) 115 V – 230 V 0927709
Chip breaker (set of 1, 0143950) (set of 2, 1264370)
*Battery (1 piece) 10,8 V / 2 Ah 1886525
*Battery (1 piece) 10,8 V / 4 Ah 1886526
Options (accessories)
Parallel cutting 0143439
Lubrication grease “G1” 25 g 0344969

SERVICE MANUALS

FABTECH SOLUTIONS is a proud distributor of Trumpf Power Tools. Our Service Department can assist with finding the right tool for the job. Ensuring high quality equipment, training and service resources is an essential component for prolonging the life and effectiveness of your sheet metal fabrication power tools and machinery.

For your convenience, there are instruction and service manuals for your Trumpf TruTools included below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.

Trumpf Slitting Shears

FABTECH SOLUTIONS offers the most competitive pricing available.

Our Sales Department offers extensive industry knowledge and experience to help you find the best metalworking equipment and machinery for your unique solution. Whether your looking to purchase new metal fabrication equipment or used fabrication machine tools, we will source your product through our industry network.
Give us a call today! (864) 518-0629