Clausing Radial Drills
Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting.
- Drilling Capacity up to 3.15" in Steel
- 3.94" in Cast Iron Tapping Capacity up to 2.56" in Steel
- 2.95" in Cast Iron Boring Capacity up to 6" in Steel
- 10" in Cast Iron
Product Details and Specifications are linked below:
Clausing Drill Presses
Low/High Variable Speeds 150-2000rpm;
Variable Speeds 200-1300rpm;
Variable Speeds 300-2000rpm.
- 150 to 2000 rpm... speeds to drill large holes, small holes to spot face, counterbore and ream.
- A flip of the switch changes from low range to high range, perfect for production applications with quick change tooling.
- Greater capacity, too, with Clausing LOW/HIGH, production rated 1-1/8" in cast iron, 7/8" in steel with optional power feed.
- Heavy-duty precision head... all bearing surfaces are precision bored simultaneously for exact alignment. Eight ball bearings support the drive and spindle, lower spindle bearing has a double row to absorb both radial and thrust loads.
Product Details and Specifications are linked below:
Clausing/Ibarmia Geared-Drive
Prismatic Column Drills
Models with Autofeed Reversing Systems for Tapping Standard
- Large worktable with 3 T-slots
- Hardened and ground high quality steel gears
- Gear box lubrication by automatic pump
- Guide ways lubricated by manual pump
- Speed plate and selecting levers on front of head
- High/low speed range selector
- Coolant tank and pump in machine base
- Automatic feed and cut-off by electromagnetic clutch
Product Details and Specifications are linked below:
Clausing/Ibarmia Round Column Drills
Models with Autofeed Reversing Systems for Tapping Standard
Product Details and Specifications are linked below:
- Series T Geared Drive
- Series K Belt Drive
- Series Z Belt Drive with Manual or Mechanical Clutch
- Series Z Belt Drive with Manual, Mechanical Clutch or Electromagnetic Clutch Feed Control
- Series X Gear Drive with Manual or Mechanical Clutch
- Series X Gear Drive with Manual, Mechanical Clutch or Electromagnetic Clutch Feed Control
- Series A Geared Drive with Mechanical Clutch Automatic Feed Control
- Series B Geared Drive with Push-Button Electromagnetic Clutch Automatic Feed Control
- Series C Belt/Geared Drive with Push-Button Electromagnetic Clutch Automatic Feed Control
- Series T/Z/X/A/B Multiple Head, Fixed Table and Oversized Table Drills
TOOLING ACCESSORIES / SERVICE AND REPAIR
FABTECH SOLUTIONS provides service and repair for all Clausing Products. Ensuring high quality replacement parts and service resources is an essential component for prolonging the life and effectiveness of your metal fabrication equipment and machinery.
Our commitment to our customers extends long after the machine is installed. Machinery parts are subject to wear and must be replaced from time to time. Replacement parts must be readily available and reasonably priced.
Please contact our Service Department with any questions or concerns.
