Clausing Standard and Super Bed Mills
Up To 16.75" x 62" Table Size; Up To 2,000 lbs Table Load Capacity; Up To 7.5 Hp with Inverter Speed Drive on Super Models
- Powerful 5 Hp spindle drive motor
- Mechanical variable speed drive with 2 speed ranges
- Hardened and ground spindle with NT40 taper
- Hardened and chromed quill with 5" travel
- CP4 ABEC7 angular contact spindle bearings
- C7 double nut X/Y/Z axes 1.26" diameter ballscrew
- Ground T-slots to provide accurate reference edge
- Hardened and ground, square X/Y ways
- Turcite B coating on saddle X/Y axes ways
- Meehanite castings for superior rigidity and wear resistanc
- Stainless steel front Y axis way cover
- Rubber Z axis and rear Y/Z axes way covers
- Automatic lubrication with alarm with alarm
Product Details and Specifications are linked below:
Clausing Standard Vertical Knee Mills
- 5 hp AC Motor (4VSQ)
- AC Rapid Vertical Drive (4VSQ)
- Variable Speed Drive
- Articulating Head for Compound Angles
- Worm gear angular positioning of head in two directions
- Lever-operated manual rapid quill movement
- Handwheel for fine quill feed
- Adjustable automatic feed and disengagement for quill feed
- Micrometer depth stop
- Reversing switch for clockwise or counter clockwise operation
- R-8 or lSO 30 Spindle (2VS & 3VS)
- ISO 40 Spindle (4VSQ)
- Spindle Brake (Hand operated)
- One-shot lubrication
- Tool Kit, Test and Accuracy Chart
- Knee Assist on (4VSQ)
Product Details and Specifications are linked below:
Clausing Horizontal & Vertical Universal Mills
A Line of Heavy-duty Universal Mills
- X, Y & Z infinitely variable speed is achieved by a inverter through the gear box and controlled at the operator friendly control panel
- Rapid traverse on X, Y & Z axis
- Variable speed on X, Y & Z axis
- High quality meehanite casting for superior rigidity and wear resistance
- All gears and shafts are hardened
- Large 13.7" x 59" (350 x 1500mm) table with 5 T-slots
- Table swivels 45° left and right
- Extra large square and dovetail square slide ways for greater accuracy
- Turcite coated Y axis for wear resistance
- Double clamps on all square slide ways
- Motorized overarm with a 5.5 Hp (3.75kw) motor
- 1" (27mm) long horizontal ISO-40 milling arbor
- Horizontal & vertical manual draw-bars
- Automatic coolant system and coolant pump